unit_test Directory Reference

Directories
	inc
	src

Detailed Description

Unit test Command Table

Note: All the data to be sent or received shall happen only if the element is provisioned and a valid publish address is provided during provisioning

Module : Switch Relay Client Module ID : 0x00

Command	Cmd ID	UT Command	Description	Status
RELAY_CLI_CMD_GET	0x00	ut 0 0 1 [el_id]	Send Relay ONOFF GET msg to element_id	PASS
RELAY_CLI_CMD_SET	0x01	ut 0 1 1 [el_id]	Send Relay ONOFF SET msg to element_id	PASS
RELAY_CLI_CMD_SET_UNACK	0x02	ut 0 2 1 [el_id]	Send Relay ONOFF SET UNACK msg to element_id	PASS
RELAY_CLI_CMD_CONFIG	0x03	ut 0 3 3 [el_id] [pub_addr] [app_id]	Configure publication address and app key	PASS

Module : Light CWWW Client Module ID : 0x01

Command	Cmd ID	UT Command	Description	Status
CWWW_CLI_UT_CMD_ONOFF_GET	0x00	ut 1 0 1 [el_id]	Send CWWW ONOFF GET msg to element_id	PASS
CWWW_CLI_UT_CMD_ONOFF_SET	0x01	ut 1 1 1 [el_id]	Send CWWW ONOFF SET msg to element_id	PASS
CWWW_CLI_UT_CMD_ONOFF_SET_UNACK	0x02	ut 1 2 1 [el_id]	Send CWWW ONOFF SET UNACK msg to element_id	PASS
CWWW_CLI_UT_CMD_CONFIG	0x03	ut 1 3 3 [el_id] [pub_addr] [app_id]	Configure publication address and app key	PASS
CWWW_CLI_UT_CMD_CTL_SET	0x04	ut 1 4 4 [el_id] [temp] [brightness] [delta_uv]	Send CWWW CTL SET Command to element_id	PASS
CWWW_CLI_UT_CMD_CTL_SET_UNACK	0x05	ut 1 5 4 [el_id] [temp] [brightness] [delta_uv]	Send CWWW CTL SET UNACK Command to element_id	PASS
CWWW_CLI_UT_CMD_LIGHTNESS_SET	0x06	ut 1 6 2 [el_id] [brigntness]	Send CWWW LIGHTNESS SET Command to element_id	PASS
CWWW_CLI_UT_CMD_LIGHTNESS_SET_UNACK	0x07	ut 1 7 2 [el_id] [brigntness]	Send CWWW LIGHTNESS SET UNACK Command to element_id	PASS
CWWW_CLI_UT_CMD_TEMPERATURE_SET	0x08	ut 1 8 2 [el_id] [temperature]	Send CWWW TEMPERATURE SET Command to element_id	PASS
CWWW_CLI_UT_CMD_TEMPERATURE_SET_UNACK	0x09	ut 1 9 2 [el_id] [temperature]	Send CWWW TEMPERATURE SET UNACK Command to element_id	PASS
CWWW_CLI_UT_CMD_DELTA_UV_SET	0x0A	ut 1 10 2 [el_id] [delta_uv]	Send CWWW DELTA UV SET Command to element_id	PASS
CWWW_CLI_UT_CMD_DELTA_UV_SET_UNACK	0x0B	ut 1 11 2 [el_id] [delta_uv]	Send CWWW DELTA UV SET UNACK Command to element_id	PASS
CWWW_CLI_UT_CMD_TEMP_RANGE_SET	0x0C	ut 1 12 3 [el_id] [min] [max]	Send CWWW TEMPERATURE RANGE SET for target publish server	FAIL
CWWW_CLI_UT_CMD_TEMP_RANGE_SET_UNACK	0x0D	ut 1 13 3 [el_id] [min] [max]	Send CWWW TEMPERATURE RANGE SET UNACK for target publish server	FAIL

Module : OS Timer Module ID : 0x02

Command	Cmd ID	UT Command	Description	Status
OS_TIMER_CLI_CMD_CREATE	0x00	ut 2 0 2 [period_ms] [reload]	Initiallise Unit Test OS Timer Instance	PASS
OS_TIMER_CLI_CMD_ARM	0x01	ut 2 1 0	Arm Unit Test OS Timer Instance	PASS
OS_TIMER_CLI_CMD_REARM	0x02	ut 2 2 0	Re-Arm Unit Test OS Timer Instance	PASS
OS_TIMER_CLI_CMD_DISARM	0x03	ut 2 3 0	Disarm Unit Test OS Timer Instance	PASS
OS_TIMER_CLI_CMD_DELETE	0x04	ut 2 4 0	Delete Unit Test OS Timer Instance	PASS
OS_TIMER_CLI_CMD_PERIOD_SET	0x05	ut 2 5 1 [period_ms]	Period Set Unit Test OS Timer Instance	PASS

Module : MeshX NVS Module ID : 0x03

Command	Cmd ID	UT Command	Description	Status
MESHX_NVS_CLI_CMD_OPEN	0x00	ut 3 0 0	MeshX NVS nampespace open	PASS
MESHX_NVS_CLI_CMD_SET	0x01	ut 3 1 1 [arm commit timer]	MeshX NVS set blob value	PASS
MESHX_NVS_CLI_CMD_GET	0x02	ut 3 2 0	MeshX NVS get blob value	PASS
MESHX_NVS_CLI_CMD_COMMIT	0x03	ut 3 3 0	MeshX NVS commit the MeshX NVS changes	PASS
MESHX_NVS_CLI_CMD_REMOVE	0x04	ut 3 4 0	MeshX NVS remove MeshX UT key	PASS
MESHX_NVS_CLI_CMD_ERASE	0x05	ut 3 5 0	MeshX NVS erase all from MeshX UT key	PASS
MESHX_NVS_CLI_CMD_CLOSE	0x06	ut 3 6 0	MeshX NVS close driver	PASS

Module : Switch Relay Server Module ID : 0x04

Command	Cmd ID	UT Command	Description	Status
RELAY_SRV_CMD_CHECK_STATE	0x01	ut 4 1 2 [el_id] [state]	Verify local Relay state (0 or 1)	PASS

Module : Light CWWW Server Module ID : 0x05

Command	Cmd ID	UT Command	Description	Status
CWWW_SRV_CMD_CHECK_ONOFF	0x01	ut 5 1 2 [el_id] [state]	Verify local CWWW OnOff state (0 or 1)	PASS
CWWW_SRV_CMD_CHECK_CTL	0x02	ut 5 2 3 [el_id] [light] [temp]	Verify local CWWW CTL state	PASS

Module : GPIO Unit Tests Module ID : 0x10

GPIO unit tests validate all GPIO API functions with valid and invalid inputs, error conditions, recovery strategies, and function-based API operations.

Validates: Requirements 10.1-10.4

Command	Cmd ID	UT Command	Description	Status
GPIO_UT_CMD_RUN_ALL	0x00	ut 17 0 0	Run all GPIO unit tests	PASS
GPIO_UT_CMD_INIT	0x01	ut 17 1 0	Test GPIO initialization	PASS
GPIO_UT_CMD_DEINIT	0x02	ut 17 2 0	Test GPIO deinitialization	PASS
GPIO_UT_CMD_REINIT	0x03	ut 17 3 0	Test GPIO re-initialization	PASS
GPIO_UT_CMD_SET_LEVEL_VALID	0x04	ut 17 4 0	Test set_level with valid inputs	PASS
GPIO_UT_CMD_SET_LEVEL_INVALID	0x05	ut 17 5 0	Test set_level with invalid inputs	PASS
GPIO_UT_CMD_SET_LEVEL_ALL_MODES	0x06	ut 17 6 0	Test set_level on all GPIO modes	PASS
GPIO_UT_CMD_GET_LEVEL_VALID	0x07	ut 17 7 0	Test get_level with valid inputs	PASS
GPIO_UT_CMD_GET_LEVEL_INVALID	0x08	ut 17 8 0	Test get_level with invalid inputs	PASS
GPIO_UT_CMD_TOGGLE_VALID	0x09	ut 17 9 0	Test toggle operation	PASS
GPIO_UT_CMD_TOGGLE_INVALID	0x0A	ut 17 10 0	Test toggle on invalid mode	PASS
GPIO_UT_CMD_INTERRUPT_REGISTER	0x0B	ut 17 11 0	Test interrupt registration	PASS
GPIO_UT_CMD_INTERRUPT_REGISTER_INVALID	0x0C	ut 17 12 0	Test interrupt registration with invalid inputs	PASS
GPIO_UT_CMD_INTERRUPT_ENABLE_DISABLE	0x0D	ut 17 13 0	Test interrupt enable/disable	PASS
GPIO_UT_CMD_ALL_INTERRUPT_TYPES	0x0E	ut 17 14 0	Test all interrupt trigger types	PASS
GPIO_UT_CMD_EXECUTE_FUNCTION_SET_LEVEL	0x0F	ut 17 15 0	Test execute_function SET_LEVEL	PASS
GPIO_UT_CMD_EXECUTE_FUNCTION_TOGGLE	0x10	ut 17 16 0	Test execute_function TOGGLE	PASS
GPIO_UT_CMD_EXECUTE_FUNCTION_PWM_DUTY	0x11	ut 17 17 0	Test execute_function SET_PWM_DUTY	PASS
GPIO_UT_CMD_EXECUTE_FUNCTION_PWM_FREQ	0x12	ut 17 18 0	Test execute_function SET_PWM_FREQUENCY	PASS
GPIO_UT_CMD_EXECUTE_FUNCTION_MULTI_ARGS	0x13	ut 17 19 0	Test execute_function with multiple arguments	PASS
GPIO_UT_CMD_HOSTED_MODE_SET_GET	0x14	ut 17 20 0	Test hosted mode set/get	PASS
GPIO_UT_CMD_HOSTED_MODE_OPERATIONS	0x15	ut 17 21 0	Test operations in hosted mode	PASS
GPIO_UT_CMD_ERROR_RECOVERY_INVALID_INPUT	0x16	ut 17 22 0	Test error recovery after invalid input	PASS
GPIO_UT_CMD_ERROR_RECOVERY_MODE_MISMATCH	0x17	ut 17 23 0	Test error recovery after mode mismatch	PASS

Module : GPIO Property Tests Module ID : 0x12

GPIO property tests validate Property 2: Mode-Aware GPIO Operation Validity.

Validates: Requirements 2.1-2.5, 2.8-2.10, 8.1-8.3, 8.9-8.10

Command	Cmd ID	UT Command	Description	Status
GPIO_PROPERTY_CMD_RUN_ALL	0x00	ut 18 0 0	Run all GPIO property tests	PASS
GPIO_PROPERTY_CMD_MODE_OPERATIONS	0x01	ut 18 1 0	Property 2.1: Mode-specific operations	PASS
GPIO_PROPERTY_CMD_ERROR_CODES	0x02	ut 18 2 0	Property 2.2: Appropriate error codes	PASS
GPIO_PROPERTY_CMD_OPERATION_ISOLATION	0x03	ut 18 3 0	Property 2.3: Operation isolation	PASS
GPIO_PROPERTY_CMD_STATE_TRACKING	0x04	ut 18 4 0	Property 2.4: Consistent state tracking	PASS
GPIO_PROPERTY_CMD_INIT_DEINIT	0x05	ut 18 5 0	Property 2.5: Initialization/deinitialization	PASS

Module : PWM Property Tests Module ID : 0x14

PWM property tests validate Property 4: PWM Subsystem Correctness.

Validates: Requirements 4.1-4.10

Command	Cmd ID	UT Command	Description	Status
PWM_PROPERTY_CMD_RUN_ALL	0x00	ut 20 0 0	Run all PWM property tests	PASS
PWM_PROPERTY_CMD_INIT	0x01	ut 20 1 0	Property 4.1: PWM initialization	PASS
PWM_PROPERTY_CMD_START_STOP	0x02	ut 20 2 0	Property 4.2: PWM start/stop operations	PASS
PWM_PROPERTY_CMD_DUTY_CYCLE	0x03	ut 20 3 0	Property 4.3: Duty cycle accuracy	PASS
PWM_PROPERTY_CMD_FREQUENCY	0x04	ut 20 4 0	Property 4.4: Frequency accuracy	PASS
PWM_PROPERTY_CMD_PARAM_VALIDATION	0x05	ut 20 5 0	Property 4.5: Parameter validation	PASS
PWM_PROPERTY_CMD_CHANNEL_ALLOC	0x06	ut 20 6 0	Property 4.6: Channel allocation	PASS
PWM_PROPERTY_CMD_STATE_MAINTENANCE	0x07	ut 20 7 0	Property 4.7: State maintenance	PASS
PWM_PROPERTY_CMD_DEINIT_CLEANUP	0x08	ut 20 8 0	Property 4.8: Deinitialization cleanup	PASS

Note: GPIO and PWM property tests share the same module ID (0x10) with GPIO unit tests. The command handler distinguishes between property tests and unit tests based on the registered callback function.